IBIS ROCK GUARD - RIPLEY V5 / RIPMO V3
ochrana rámu Ripley V5 / Ripmo V3
This is a replacement rock guard for the lower downtube of the Ripley V5 and Ripmo V3. Use this to keep your lower downtube protected.
Key Specs:
- Easy “peel and stick” installation
- Made from 5mm thick toughened rubber
Installation Tips
- Cold may prevent the guard from adhering properly. We recommend applying at temperatures 50F/10C or warmer.
- We recommend applying only if your paint is in good condition. If the paint is chipped, there is a risk you could remove additional paint when removing the guard.
- To remove, we recommend applying a gentle heat from a warm hair dryer to reactivate the glue, then gently peeling up the edges.
- Ibis is not responsible for any paint damage that may occur when removing the adhesive.