IBIS DV9 ROCK GUARD
chránič spodní části rámu
This is a replacement rock guard for the lower downtube of the DV9 V2. Use this to keep your frame looking extra fresh.
- Easy “peel and stick” installation
- Made from 5mm thick toughened rubber
- Does not fit DV9 V1 or T29, due to frame shape
- Cold may prevent the guard from adhering properly. We recommend applying at temperatures 50F/10C or warmer.
- We recommend applying only if your paint is in good condition. If the paint is chipped, there is a risk you could remove additional paint when removing the guard.
- To remove, we recommend applying a gentle heat from a warm hair dryer to reactivate the glue, then gently peeling up the edges.
- Ibis is not responsible for any paint damage that may occur when removing the adhesive.